Machine / Grinding Coolants

Lubie Lube #295 Grinder & Machining Coolant

Lubie® #295 Grinder and Machining Coolant is a new generation, high performance, non- petroleum, semi-synthetic water diluteable grinding and machining coolant formulated for all types of manual and automatic grinders and machining operations.

It is formulated with wetting agents, special lubricity additives, water conditioners,
detergents, rust inhibitors and bactericides.

  • Provides superior lubricity for extended tool life.
  • The clear color will not obscure vision while machining or grinding.
  • Extremely resistant to bacterial growth.
  • Excellent chip and metallic dust settling properties, preventing recirculation in the coolant, plugged filters, damaged pumps and damage to the workpiece.
  • Reduces wheel loading and glazing, thus eliminating frequent wheel dressing whileincreasing wheel life and production.
  • No gummy or sticky residue on machines or workpieces.
  • Keeps chucks, slides, ways and other moving parts free of dirt, chips and fines, thereby increasing machine life and allowing for closer tolerances.
  • Exhibits effective rust protection on steels and cast iron.
  • Excellent for use on aluminum.

Lubie #295 contains no nitrite, phenol or sulfur. It has long tank life along with being stable in hard water, and is very low foaming. It is normally used at 5% to 15% dilution with water.

PHYSICAL DATA
Use Dilution 5% to 15% Color Blue/Green
Foam None Lubricity Agents Yes
Chloride None pH@ 5% Emulsion 9.45
Flash Point None Lbs. per gallon 8.68
Chip Settling Rapid Odor Slight Pine
UNIT (Gallons) CATALOG #
CASE (4 Gallons) Lubie GL295-1
PAIL (5 Gallons) Lubie GL295-5
DRUM (55 Gallons) Lubie GL295-55