Machine / Grinding Coolants

Lubie Lube Blade Clean #FC-930 and Foam Knocker M-433

Lubie® #FC-930 is a heavy duty waterbased cleaner formulated to remove heavy burnt on wood resin deposits and pitch from cutting tools. It can be used on all types of ferrous metal saws, moulder heads, finger joint knives and other tooling.

Lubie® #FC-930 can be used as an undiluted cold dip or diluted 5:1 with water and used as a hot tank cleaner at 170 F. Always rinse parts with clean water after cleaning and apply a light coat of oil to prevent surface rust. Lubie® #FC-930 is not to be used on aluminum or non-ferrous parts because corrosion or pitting may occur.

FC-930 PHYSICAL DATA
Raw Material Base Synthetic Detergent Color Clear / yellow
Boiling Point >212°F; >100°C Freeze Point 32°F; 0°C
Percent Volatiles by Weight <1% Odor None
Flash Point None Solubility 100%
Specific Gravity 1.120 pH @ 1% +12
Lubie® #FC-930 is non toxic and biodegradable.
Used On:
Ace, WKW and Grecon FingerJoint Heads and Knives Ace, Weinig, Deihl, WKW and other Moulder Heads
FC-930
UNIT (Gallons) CATALOG #
PAIL (5 Gallons) Lubie FC930-5

Lubie® Foam Knocker M-433 is an anti-foam formula for water-based concentrates.

Foam Knocker M-433
UNIT (Gallons) CATALOG #
CASE (4 Gallons) Lubie M433-1
PAIL (5 Gallons) Lubie M433-5