Woodworking Lubricants

With many different blends of Lubie Lube products to choose from, we're sure you'll find one to meet your particular needs. And remember, all of our Lubie Lube formulations are free of toxic and hazardous chemicals and are biodegradable. No silicones or waxes are used in any of our products.

Lubie® #2: A synthetic oil blended saw lubricant formulated for economy with twice the lubricating strength of diesel fuel and safe for spray systems. Generally used in a spray, drip or wick system.

Lubie® #3: Waterbased floropolymer and synthetic lubricant blend ideal for thin kerf saw blades and finger joint knives processing dried hardwoods such as hickory, walnut, white oak, and ash. This will work well on regular gang ripsaws and narrow and wide band saws. It will remove ash resin and runs well on all hardwoods. Non flammable, biodegradable, no silicone, no odor and no health hazard. Generally used in a spray system.

Lubie® #4: Formulated specifically for removing spruce, pine, and fir resins on all wood processing equipment. Concentrated synthetic emulsion that can be used straight or diluted with water. This is a good cleaner, coolant and lubricant for softwoods. Nonflammable when diluted with water, biodegradable, no silicone, no odor and no health hazard.

Lubie® #5: Concentrated synthetic emulsion with extremely high lubricity and good cleaning ability. When diluted with water, Lubie® #5 will remove heavy resin buildup from bandsaws. Much better lubricant and less expensive to use than diesel fuel. Also used for guided gang saws at 1% to 3% concentration. Guided gangs run this in the mixing tank or injectors. Bandsaws generally spray. Non flammable, no silicone, no odor, biodegradable, no health hazard.

Lubie® #6: High viscosity blended synthetic oil lubricant designed to replace fuel oil in wick feed systems for large bandmills. Retards pitch buildup on saw blades while reducing guide and wheel wear. Non-flammable, non-hazardous, non-staining, and odorless.

Lubie® #7: Low viscosity version of Lubie® #6 for use in spray, mist, and drip lubricating systems.

Lubie® #7-WG: A special, winter grade version of our popular Lubie® #7, for use in mills affected by cold weather during the winter months. Free flowing to 20*F (-7*C), this synthetic oil blended lubricant will not jell at freezing temperatures. Workhorse all-weather lubricant ideal for use in atomizing mist systems such as the Lubie 900 Industrial Lubricating System. Non-flammable, non-hazardous, environmentally friendly, and odorless.

Lubie® #8: Low viscosity synthetic blended oil lubricant with over three times the lubricity of diesel fuel and better cleaning action than diesel fuel. Designed for use on hardwoods and softwoods where saw performance is critical. This will remove light SPF resin build-up. Generally used in spray, wick or drip systems. Flash point >400*F, mild pine odor, no silicone, biodegradable and low health hazards.

Lubie® #9: Concentrated waterbased high-grade synthetic lubricant for both hardwood and softwood sawing. Designed to be diluted with water (dilution ratios as high as 10:1) for economy. Non-flammable, non-hazardous, environmentally friendly, with a mild pine odor. Ideally suited for pallet shops cutting all species.

Lubie® #200: Moulder bed lubricant: a blended, fast evaporation formulation of synthetic lubricants. Choose from three different viscosities.

Lubie® GP: General Purpose synthetic oil blend for most wood processing applications. Works well in spray, mist, drip, and wick feed systems. Non-flammable, enviromentally friendly, and odorless.

Lubie® 54: A high grade synthetic emulsifiable high pressure lubricant fortified with cleaner. Designed to remove pine pitch and resin from guided gang blades while providing superior lubrication and cooling. Lubie® #54 is generally used at 2% to 5% in bulk tank and injection systems. Lubie® #54 does not contain silicones or petroleum solvents and will not stain or discolor wood.

Lubie® 55: A concentrated high grade synthetic emulsifiable lubricant designed to be used in guided gang saws. Lubie® #55 is formulated to provide maximum lubrication at the babbit / steel interface of circular guided gang saws.

Lubie® 57: A high grade synthetic oil designed to be used in guided gang saws. Lubie® #57 is formulated to provide maximum lubrication at the babbit / steel interface of circular guided gang saws.

Lubie® 59: A concentrated high-grade synthetic emulsifiable lubricant designed to be used in guided gang saws. Lubie® #59 is formulated to provide maximum lubrication at the babbit / steel interface of circular guided gang saws.

Lubie® SGO: Lubie® #SGO is a water soluable oil for use in all makes of guided gang saws and guided edgers. Although priced for economy, Lubie® SGO is fortified with wetting agents, bactericide, and rust inhibitors. Available only in 55 gallon drums.