Woodworking Lubricants

Lubie® #4

A high-grade synthetic emulsifiable lubricant fortified with special cleansers, designed to remove pine pitch and resin while providing superior lubrication and cooling.

Lubie® #4 is used full strength in wick, drip and spray systems to cool, lubricate and remove heavy SPF resin build-up on band saw blades, circular saws, gang rip blades and other wood cutting tools. Bandsaws can dilute Lubie #4 up to 10:1 with water if build-up is not heavy (Contact Barker Inc for additional information before using Lubie #4 for finger joint knives).

  • Lubie® #4 is non flammable, non toxic and biodegradable, and environmentally friendly.
  • It does not contain any chemicals listed in SARA Title III, Section 313 or in OSHA 29 CFR 1910.
  • Lubie® #4 does not contain silicones and will not stain or discolor wood.

Lubie® #4 full strength or diluted up to 10:1 with water is most effectively applied through Lubie® 900 spray systems, which give the ultimate in application and volume adjustments.

PHYSICAL DATA
Raw Material Base Synthetic Emulsion Color Neat: Light Yellow Color
Diluted: Milky White
Boiling Point Neat: 285°F
Diluted: 100°C, 212°F		 Specific Gravity Neat: 0.855
Diluted: 1.00
Flash Point Neat: >235°F
Diluted: N/A		 Freeze Point Neat: N/A
Diluted: 0°C, 32°F
Percent Volatiles by Weight <20% Lubricity Rating Neat: 0.035 (diesel fuel=0.074)
Solubility 100% Odor Light Pine
USED ON:
Finger Jointers by: Western Pneumatics, Industrial (Aceco and Wisconsin tooling).
Gang Rip Saws by: Mereen-Johnson, SCMI, Cornell, Diehl, Brewer and Yates.
Band Saws by: McDonough, Salem, Filer & Stowell, Wheiland, Brewer, Kimwood, Ferrari, Forester.
Moulders by: Weinig, Wadkins, Madison, Tri State and Diehl.

UNIT (Gallons) CATALOG #
CASE (4 Gallons) Lubie 4-1
PAIL (5 Gallons) Lubie 4-5
DRUM (55 Gallons) Lubie 4-55