Woodworking Lubricants

Lubie® #7

A pure low viscosity synthetic oil lubricant designed for unheated shops that need low viscosity at low temperatures. Lubie® #7 is designed to lubricate, cool and retard resin and pitch build-up on band saw blades, circular saw blades and other wood tooling.

Lubie® #7 provides over twice the lubricating strength of diesel fuel or vegetable oils. Many mills use Lubie® #7 to lubricate the headrig ways and carriage wheels and rails. Lubie® #7 replaces diesel fuel in spray and wick systems on headrigs and line bar resaws. Mills using about 2 quarts per shift of Lubie® #7 find the cost equal to diesel fuel while eliminating the fire hazard, personal safety and odor problems of diesel.

  • Lubie® #7 is low cost, odorless, not a skin irritant, non toxic, biodegradable, and is environmentally friendly. It does not contain any chemicals listed in SARA Title III, Section 313 or in OSHA 29 CFR 1910. Lubie® #7 does not contain silicones and will not stain or discolor wood.

    Lubie® #7 is most effectively applied through Lubie® 900 spray systems which give the ultimate in application and volume adjustment. Wick, drip and other spray systems have run Lubie® #7 effectively.

    PHYSICAL DATA
    Raw Material Base Synthetic Oil Color Clear/Light
    Boiling Point >400°F Specific Gravity 0.838
    Flash Point >280°F Freeze Point N/A
    Percent Volatiles by Weight <3% Lubricity Rating 0.037 (diesel fuel=0.074)
    Solubility <0.1% Odor None
    USED ON: Pour Point -81°C, -90°F
    Gang Rip Saws by: Mereen-Johnson, SCMI, Cornell, Diehl, Brewer and Yates.
    Band Saws by: McDonough, Salem, Filer & Stowell, Wheiland, Brewer, Kimwood, Ferrari, Forester.

    UNIT (Gallons) CATALOG #
    CASE (4 Gallons) Lubie 7-1
    PAIL (5 Gallons) Lubie 7-5
    DRUM (55 Gallons) Lubie 7-55